PARKING SENSOR KITS
SSRDISB - Four Reverse Parking Reversing Sensors Kit With LED Warning Buzzer
Reverse Parking Sensor Kit / LED Display 4 Ultrasonic Sensors
- 4 Sensors
- 0 to 2m distance alarm
- LED Display Digital Color
- Bi Bi alarm buzzer
- Notice obstacle to the left and right
Working Voltage: DC 9V to 15V
Rated voltage: DC 12V
Answer Distance: 0.4m to 2.0m
Remote alarm: 0 to 2m
Display Mode: LED display
Sensor diameter: 22mm
Installation mode: Drilling
Angle of probe: X, Y, 60 degrees
Operating temperature: -30 to 80 degrees Celsius
Type of alarm: buzzer (Bi Bi ...) Alarm volume: 65dB
Alarm frequency: 1.6 to 2.0 (Mute); 1.1 to 1.5 m: 1 Hz (slow); 0.6 to 1.0 m: 3 Hz (normal); 0 to 0.4 m: 7 Hz (pressed)
Package Included: 1 * 4 Sensors , 1 * LED display , 1 * Power Cable ,1 * Hole Saw, 1 * English manual
SSM-RBP + SEN-MB - Four Sensor Front or Rear Reversing Kit
Front or rear sensor kit with audible buzzer alert. Compatible with all vehicles.
- Adjustable volume buzzer
- Fully automatic operation
- Detection range: 1.5 m/4.9 ft
- Operating temp : -30°C to 70°C
- Built in self diagnostics to detect sensor fault
Audio Buzzer Unit
Fitting Accessories (cable ties, double sided tape, templates)
AVRSLRN - Self Learning Parking Sensor Kit
Parking sensor system consists of 4 ultrasonic sensors, digital control MCU and buzzer.It detects the distance between a vehicle and obstructions using the ultrasonic sensors installed
into the rear bumper (allowing tow bar fitment), with stage warning sound function. The drivercan judge the distance to avoid collisions.
- "BiBi" alarm sound
- Hidden installation
- Sensitivity adjustable switch
- 70dB buzzer
- Fitment to vehicles with tow bar or spare wheel
TOW BAR FUNCTION
This system has a tow bar function. The system will not alarm if there is a tow bar on the rear of the vehicle.20CM ON/OFF switch.There is an ON/OFF switch on the rear of the control module. If set to “on” the alarm distance will be 20cm shorter than the real distance. This is designed to be used when a vehicle has a spare wheel on the rear. The system will detect the distance between the obstacle and spare tyre rather than between obstacle and bumper.
Rated Voltage: DC 12V
Operating Voltage: DC 10.5 16V
Rated Current: 20-200mA
Detecting Distance: 0.2 2.5m
Ultrasonic Frequency: 40KHz
Controller Working Temperature : -30 ~+70
Buzzer Dimensions (LxHxD) 42x42x16mm
AVRSNP - Number Plate Mount Reversing Kit
The kit is a 3 recess sensor high quality system that will cover the widest of cars giving a professional OEM finish. Included with the 3 recess sensors is a buzzer which gives audible bleeps with increasing frequency as you get closer to an obstacle.
The system works by radiating ultrasonic beams covering the area behind the vehicle. The beams are reflected by obstructions behind the vehicle, and re-enter the sensors. The reflected beam information is processed to calculate the distance of the obstruction.
As with the other systems the Veba's are activated when reverse gear is engaged and as the vehicle is reversed. When the vehicle is less than 1.5 metres from the obstruction the audible alert will emit intermittent bleeps. As the vehicle gets closer to the obstruction the frequency of the bleeps increases. At 45 centimetres from the obstruction the bleeps become a continuous solid tone.
The Veba Number Plate Parking Sensor is an easy to install piece of kit that will let you know when you're too close to the object behind you! The sensor is installed behind your number plate so no drilling is required, and it's made to fit the majority of standard sized UK number plates.
- Operating range: 9V ~ 16V DC
- Power Consumption: 3 Watts
- Operating Temperature: -20c to +70c
- Detecting distance: 0.3m to 2m
- Detecting angle: H> 60 degree - V>60 degree
- Number plate Surround
- 3 Sensors
- Wiring Loom
- Fitting Instructions Included
No routine maintenance or adjustment is required. Dirt, frost or snow accumulated on the sensors may cause the system to activate incorrectly. Clean carefully with a soft cloth. Do not use chemicals or spirits. Applying hot water in frozen conditions may damage the sensors. The sensors can be washed carefully with warm soapy water.
Width - 52.5cm Approx
Length - 13.5cm Approx
Depth - 3cm Approx
The fitting instructions are included