RING BATTERY CHARGERS AND BOOSTER PACKS
RBAG950 RING COLOUR SCREEN BATTERY ANLYSER
The RBAG950 Battery Analyser can provide a complete health check of the battery and electrical systems in 12V and 24V vehicles, such as motorcycles, cars & trucks.
This multi-function unit can test the battery, alternator, starter and vehicle earth via its intuitive graphical interface. Results can then be printed using the built-in thermal printer, and viewed on other devices via the removable SD card or through the printed QR code.
The testing cables measure 3m in length, allowing the user to carry out lithium battery testing in or out of the vehicle. The device also comes in a handy storage case.
0-649-50 HEAVY DUTY LI-POLYMER JUMP STARTER PACK - 12/24V
This Durite 12/24V Li-Ion Jump Starter Pack is super light & compact and suitable for all petrol & diesel 12/24V vehicles. It has a built in battery heat pack that supports cold cranking and a 3W LED work light.
- Starts petrol & diesel vehicles up to 18L
- Super fast charging time of 4 hours
- Built in battery heat pack
- Built in 3W LED work light
- 56,000mAh
- 2,000A peak current, 1,000A starting current
- 1 x 5V 3A USB output, 1x12V 10A socket output
- L260.7 x D188.0 x W148.7mm
- UKCA, CE approved
0-524-74 ELECTRONIC BATTERY TESTER WITH START/CHARGE ANALYSER - 12/24V
For use on lead-acid automotive batteries including: WET cell, Lead/Calcium, Sealed, Deep cycle, AGM GEL and maintenance free
- Start/charge analyser
- Microprocessor controlled
- LCD display
- CE, RoHS approved
Ring RSC612 12A Smart Diagnostic Battery Charger
12A Smart Battery Charger, to charge, protect, repair and analyse 12V batteries in vehicles up to 5L. Smart chargers are ideal for lead acid, gel, calcium, AGM and EFB batteries - and essential for maintaining START/STOP vehicles.
The RSC612/RESC612 Smart Charge applies an eight stage cycle, that recharges at the optimum speed, repairs damage to the battery, and automatically switches to a low charge rate once the battery is recharged, ensuring that it maintains its charge level without causing damage through overcharging. The RSC612/RESC612 also has four battery analysis tools, that test start power, the alternator check, battery cranking performance and battery voltage, to give you a full view of your vehicle battery's health.
The RSC612/RESC612 also has maintenance mode - ideal for long term connection - and memory saver function, so it can retain the vehicle's electronics settings (e.g. radio settings) if the battery is disconnected. The winter charge mode is ideal for charging in cold weather. The LCD screen makes it easy to take readings and select charge or analysis settings. This is a comprehensive battery care tool.
Ring RCBT30 Workshop Bench Battery Charger w/Jump Start
Professional 30A workshop charger with 150A jump starter. Suitable for 12V and 24V vehicles, ideal tool for a fleet of mixed vehicles including cars, LCV and HGVs. Includes selectable charging and jump start functions, so it can charge at different amp rates for a quicker recharge or, when needed, jump start a flat battery. Features analogue ammeter to show charge status. Rugged metal casing and transport handles are designed to withstand the robust working environment in a workshop. The fully insulated high capacity battery clamps improve user safety. Includes thermal and overload protection. Suitable for intensive use in garages, workshops and commercial vehicle depots.
Ring RCB212 12V 12Amp Battery Charger
12A fully automatic battery charger for 12V vehicles up to 3L. Protects from overcharging: detects when the battery is full and automatically switches to a lower charge rate. The LED display screen shows battery voltage and charge rate applied, and also includes reverse polarity indicating LED. Fast and slow charge rate settings. Includes storage compartments for cables and battery clamps, and rubber handle for comfortable grip. Ideal for DIY, enthusiasts and standard battery charging.
Ring RSC804 4A Smart Chargerand Battery Maintainer
The Ring RSC804 is a 4A smart charger and battery maintainer suitable for 6V and 12V vehicles and recommended for START/STOP batteries. Compatible with lead acid, gel, calcium, EFB and AGM batteries. Keeps batteries in good condition without risk of overcharging. One button operation and large LCD backlit display for ease of use as well as reverse polarity and short-circuit protection for safety. Connect and be sure with the charger adjusting automatically to long-term maintenance mode when the vehicle's battery is full.
Ring RSC806 6A Smart Chargerand Battery Maintainer
6A smart charger, for both 6V and 12V vehicles. Recommended for START/STOP batteries as well as being compatible with lead, gel, calcium, AGM and EFB battery types. Keeps batteries in good condition without risk of overcharging. One button operation and large backlit digital display for ease of use as well as reverse polarity and short-circuit protection for safety. Connect and be sure that there won't be any over charging as a result of using the smart charger with the charger adjusting automatically to long-term maintenance mode when the vehicle's battery is full.
Ring RSC808 8A Smart Chargerand Battery Maintainer
8A smart charger and battery maintainer suitable for 12V and 24V vehicles and recommended for START/STOP batteries. Compatible with lead acid, gel, calcium, EFB and AGM batteries. Keeps batteries in good condition without risk of overcharging. One button operation and large LCD backlit display for ease of use as well as reverse polarity and short-circuit protection for safety. Connect and be sure with the charger adjusting automatically to long-term maintenance mode when the vehicle's battery is full.
Ring RCBT40T Trolley Battery Charger & Jump Starter
40A trolley battery charger and jump starter, for 12V and 24V vehicles with lead acid batteries. Ideal tool for a fleet of mixed vehicles including cars, LCV and HGVs. Ideal to jump start and charge from just one unit.
This trolley charger has four charge rate settings, to provide the best option for the battery capacity and condition. Includes LED display to show charge status. The 280A jump starter quickly revives flat batteries. Transport handle and wheels make it ideal to move around garages, workshops and commercial vehicle depots. The rugged metal casing and high impact wheels with metal bearings are tough enough to withstand workshop conditions. Fully insulated high capacity battery clamps provide enhanced user safety, and the unit includes thermal and overload protection.
Ring RCBT55T Trolley Battery Charger & Jump Starter
55A trolley battery charger and jump starter, for 12V and 24V vehicles with lead acid batteries. Ideal tool for a fleet of mixed vehicles including cars, LCV and HGVs. Ideal to jump start and charge from just one unit.
This trolley charger has six charge rate settings, to provide the best option for the battery capacity and condition. Includes LED display to show charge status, plus 60 minutes timer. The 420A jump starter quickly revives flat batteries. Transport handle and wheels make it ideal to move around garages, workshops and commercial vehicle depots. The rugged metal casing and high impact wheels with metal bearings are tough enough to withstand workshop conditions. Fully insulated high capacity battery clamps provide enhanced user safety, and the unit includes thermal and overload protection.
The ideal battery maintenance tool for intensive commercial use
Ring RCBT60T Automatic Trolley Smart Battery Charger
55A trolley battery charger and jump starter, for 12V and 24V vehicles with lead acid batteries. Ideal tool for a fleet of mixed vehicles including cars, LCV and HGVs. Ideal to jump start and charge from just one unit.
This trolley charger has six charge rate settings, to provide the best option for the battery capacity and condition. Includes LED display to show charge status, plus 60 minutes timer. The 420A jump starter quickly revives flat batteries. Transport handle and wheels make it ideal to move around garages, workshops and commercial vehicle depots. The rugged metal casing and high impact wheels with metal bearings are tough enough to withstand workshop conditions. Fully insulated high capacity battery clamps provide enhanced user safety, and the unit includes thermal and overload protection.
The ideal battery maintenance tool for intensive commercial use
Ring RPPL700 Lithium Professional Jump Starter
The Ring RPPL700 Lithium Professional Jump Starter is ideal for petrol vehicles up to 8.0L and diesel vehicles up to 6.0L, such as motorcycles, cars, 4x4s, vans, commercial vehicles and boats.
The RPPL700 has a tough build with rubber moulding and is 75% lighter than an equivalent lead acid jump starter, making it more mobile and ideal for being used frequently in a workshop.
Under normal conditions, with a fully functioning alternator, if the jump starter is fully charged before use, leaving the clamps connected to the vehicle will recharge the jump starter from the vehicle alternator in around 60 seconds.
Mains docking station included.
Ring RPP170 12v Jumpstart, Compressor and Inverter
Multi Use Powerpack - For Jump starting, Compressed Air and Portable Power.
Ring Automotive 12v 17ah 2.0L PowerPack with 200w inverter giving 230v Mains Power.
150psi compressor which is suitable for inflating vehicle tyres and leisure inflatables
12v DC power sockets ideal for powering DC appliances
Includes charging station.
Ring RPPL1000 Lithium Professional Jump Starter
The Ring RPPL1000 Lithium Professional Jump Starter is ideal for all petrol vehicles and diesel vehicles up to 10L. This includes motorcycles, cars, 4x4s, vans, commercial vehicles and boats. It has a built-in LED work light to allow use in darker conditions as well as a safety function (SOS) and weighs only 2kg, which is 75% lighter than equivalent Lead Acid jumpstarters. This makes it more mobile and easier to use in any situation, be that in a garage environment or out on the road.
Contained within the robust, hard-wearing casing is a lithium-ion battery that allows for fast recharging via the PD60W input. The battery charge level on the face of the unit provides a visual aid for the unit's charge status. Also, it has a power bank function and multiple safety protections to prevent damage to the vehicle and user.
- Jump starts ALL Petrol engines and up to 10L Diesel Engines
- 1500 Peak Amps / 1000 Starting Amps
- Fast charging with PD60W input
- 75% lighter than equivalent Lead Acid Jump Starters
- Multiple safety protections
- Powerbank function
- Built-in worklight for safety
Ring RBAG750 Graphical Battery Analyser
The RBAG750 Graphical Battery Analyser can provide a complete health check of the battery and electrical systems of a 12V and 24V vehicle, be it a motorcycle, car or truck.
This multi-function unit can test and analyse the battery, alternator, starter and vehicle earth via its intuitive graphical interface. Results can be printed using the built-in thermal printer, or downloaded to a computer through a USB.
FL 113D - Deca 6 - 12 - 24 Volt Fully automatic battery charger
Fully automatic battery chargers built with electronic charge control and charging conservation "Floating".
Suitable for charging lead batteries: WET serviceable and maintenance free, AGM, AGM Power, GEL, Start & Stop, Ca/Ca.
Multi step charging The batteries are charged by applying sophisticated multi-step programs.
High efficiency " I-U " Charging characteristic (constant current-constant voltage) minimises battery charging time.
Floating Can remain connected to the battery for a long time. Batteries are ready to use at all times.
Safety guaranteed Designed to protect vehicle electronics. Non-sparking. Reverse polarity protected and short-circuit proof. Charging voltage is free of interference and voltage peaks. Allow battery charging directly on the vehicle electrical system, without disconnecting the battery. (DIN 40839 interference emission level I)
Battery Test - Sulphated battery detection
"Sulfated Battery Recovery" Desulphation / Equalization programme Regenerate batteries that have underdone heavy discharge cycles.
Battery charger suitable for the workshop.